YC25 hydraulic backhoe excavators utilize "Servo Hydraulic Pilot device" and have the functions of stone-breaking, digging, and grabbing shoveling, drilling and bulldozing. The excavator can move with rubber crawlers and its working platform can rotate 360 degrees. It's reliable, user-friendly and compact of high quality & high-efficiency. Our excavators have been widely used in erection of buildings and wooden land, municipal engineering, construction of water supply, gas, heating and telecommunications, construction on
| Basic Dimension of YC25-2 | | | | | YC25-2 | | Code | Item | Units | 825 | 825A | | | Machine Weight | Kg | 2820 | 3080 | | | Volume of Backhoe | m3 | 0.07 | 0.07 | | | Engine | | Cummins A1400 | | | Power of engine | KW/rpm | 22/2300 | | A | Overall Length (trans pos) | mm | 4510 | 4510 | | B | Overall Height (trans pos) | mm | 2395 | 2395 | | C | Width of Undercarriage | mm | 1450 | 1450 | | D | Width of Track | mm | 300 (Rubber/Steel) | | E | Maximum Platform Tail Turning Radius | mm | 1346 | 1346 | | F | Length of Track | mm | 1935 | 1935 | | G | Sprocket to idler centres | mm | 1455 | 1455 | | H | Dist. between Undercarriage and Ground | mm | 292 | 292 | | I | Dist. Between boom and ground | mm | 1409 | 1409 | | J | Width of Platform | mm | 1444 | 1444 | | K | Dist. Between Hood and Ground | mm | 1375 | 1375 | | L | Dist. Between Platform and Ground | mm | 563 | 563 | | | Outer Width of Bucket | mm | 517 | 517 | | | Travelling Speed | Km/h | 2.4/4.2 | 2.4/4.2 | | | Swing Speed of Platform | rpm | 10~12 | 10~12 | | | Cabin | | | ¢ | | | Canopy | | ¢ | | | | Swing Angularity of the Digging Arm (L/R) | ＜ | 80/50 | 80/50 |
| Range of Operation | | | | | | | | | | YC25-2 | | Code | Item | Units | 825 | 825A | | A | Maximum Digging Height | mm | 4205 | | B | Maximum Dumping Height | mm | 2840 | | C | Maximum Digging Depth | mm | 2610 | | D | Maximum Digging Radius | mm | 4610 | | D1 | Maximum Digging Dist.of Ground | mm | 4487 | | E | Maximum Height Digging Radius | mm | 2957 | | F | Minimum Platform Tail Turning Radius | mm | 1856 | | G | Maximum Depth for Bulldozing | mm | 372 | | H | Maximum Height for Bulldozing | mm | 262 | | | Maximum Digging Force | kN | 17.4 | | | | | | | Notice: The above dimension is the nominal data only, and we have the right to change them without prior notice. |
Basic Dimension
Range of Operation
 |
|
